The picture above shows our Pulsatile Pump P-120 For Driving Vascular Models. This flow pump is independently developed by our company, which is intended for simulating activities of the human heart. the biometric blood circulation system of this pulsatile pump is able to create some typical physiological features such as similar heart beat frequency, blood pressure, flow rate, and simulated blood temperature.It is mainly used to build a human blood circulation system for medical Training, scientific research, medical device intervention demonstrations , etc.
● The liquid temperature and pulsation rate can be adjusted,the flow , pressure, air-out, real temperaure, high pressure duration can be set.
● With all-metal enclosure, the flow pump is easily portable thanks to its light weight design.
● Parameters like pulse frequency and blood temperature can be showed and adjusted on the HD capacitive touch screen.
●The Pulsatile Pump P-120 For Driving Vascular Models is applicable to low-volume silicone vascular models. The pulse rate, blood pressure and blood circulation can be observed when vascular model connect to pump by tube connection.
Technical parameters
|
Input voltage: |
100-240V AC 50/60HZ |
|
Circulating rated power: |
150W |
|
Heat load rated power(total rated power): |
650W |
|
Operation mode |
5.0-inch touch screen 800*480 resolution |
|
Pulsation frequency: |
10-200bpm (adjustable) |
|
Pressure at pulsation output end: |
20-350mmHg (adjustable) |
|
Flow at pulsation output end: |
1-5L/min (adjustable) |
|
Temperature control range of circulation system: |
25-45℃(adjustable) |
|
Temperature control accuracy: |
±0.5℃ |
|
Waterproof grade: |
IP54 waterproof grade |
|
Device size: |
340*230*146mm |
|
Packing size: |
622*465*285mm |
|
Device weight: |
7.4Kg |
|
Total package weight: |
14.80Kg |
|
Liquid storage capacity: |
2.15L |
|
Supporting circulating liquids: |
ordinary water, brine and PBS |
|
Interface type: |
C-type quick connector |
